3D Ocean Nails: Acrylic Nail Art Tutorial with Meg

Dreaming of the seaside? In this tutorial, Meg creates a full set of 3D ocean nails, complete with a sculpted jellyfish, a turtle, coral, an octopus tentacle and starfish. Every creature is built up in 3D and then hand-painted, before the remaining nails are finished with shell tips, watery effects and beach embellishments.

This is a big, detailed set, and Meg is honest that it is very time consuming. It is also the first time in more than eleven years of doing nails that she has sculpted 3D turtles, starfish and an octopus on someone's nails, so you can follow along knowing that even an experienced tech is working it out as she goes. If you love summer holiday nail art with real texture, this is a brilliant one to study.

Why You'll Love These 3D Ocean Nails

What makes 3D ocean nails so striking is the mix of textures. The sculpted sea creatures sit proud of the nail, while the flat nails around them use soft shell patterns and water effects to tie everything together. As Meg says while she works, corals, pinks, blues and nudes go so nicely together, and that palette gives the whole set a calm, beachy feel.

The design is also a great way to practise several skills in one sitting. You get to try sculpting with a rubber tool, layering gel polish colours for shading, painting a shell tip with simple strokes and letting blooming gel do the hard work on a water design. Each nail is its own little project, so you can pick out one or two ideas or go for the whole ocean.

Products Used in This Video

How to Create 3D Ocean Nails Step by Step

1. Start with a matte base

Meg begins with matte top coat as the base for the 3D work. The acrylic base she uses underneath is Flawless, but she points out that you can use anything you like.

2. Sculpt the jellyfish

The first 3D design is the jellyfish. For the body, pick up a very large bead of acrygel and wet it with some slip solution. Use a rubber tool to move the product about on the nail, so that it doesn't stick to your fingers.

3. Sculpt the turtle

Start with the shell, using the rubber tool to make little indents around the outside to give it texture. Meg tries not to let the product melt too much, so she sculpts the head and the body first and cures them before going back to add the legs. The whole turtle is made in 3D.

4. Build the coral

The coral goes on the thumb. Create a main stem first, then add branches of different lengths off the side, as if it were a tree, and press in some little indents. It doesn't have to be perfect, because coral is quite rustic looking. Just make sure you have some long pieces and some short pieces.

5. Add the octopus tentacle

On the other thumb, Meg sculpts an octopus tentacle. Lay down the base of the tentacle and cure it as it is. Once it is cured, go back in and put the little circles, or dots, on top.

6. Sculpt the starfish

Last but not least, a starfish is sculpted on each of the two pinky nails. By this point Meg is around two hours in, so allow plenty of time for the 3D stage.

7. Paint the base colours

Meg uses Blue Raspberry for the first coat of colour, a shade she says has become her favourite. Butterscotch is used for the base of the jellyfish and again for the base of the turtle, with the smaller details added afterwards. For the coral, start with Cocobana and, while it is still wet, add bits of Flame Point and mix it in. The octopus tentacle is painted with Cocobana too.

8. Add shading and details

Petal Perfect is used instead of white for the lighter areas, and Royal Blood creates the shadow. The turtle is given little circles, and Coffee Bean is used on both the turtle and the starfish, including the dots along the edge of the starfish. Meg adds a few darker lines around the edge and a little more Coffee Bean as a shadow, then uses Petal Perfect to add light dots to the starfish and the turtle.

9. Paint the shell tip

For the shell tip, Meg uses Miami Beach. To create the shell design, run strokes of colour across the nail. You want a light and a dark shade, and Meg also adds a couple of layers of Butterscotch, because the nude colour makes it look more natural, like a real shell. Keep going back and forth until you are happy.

10. Create the water design

Apply Blue Reflection all over the nail. Meg uses her airbrush machine where she wants the water to go, then mixes Snow White and top coat together. Put blooming gel all over the area, then place the white mix along the shoreline in dots and it basically does the work for you. Blue Reflection is used again under the turtle, with more airbrushing to create the white wash. Go back and forth until it creates the look you want. Another nail gets Blue Raspberry with the same white and top coat mix, applied without making it too thick.

11. Add shells, starfish, droplets and pearls

Meg places small shell and starfish embellishments, choosing a smaller shell for one nail and a different one for the other. She uses Clear as Day to add a little droplet, which makes it look like a wet nail, and mixes Clear as Day with Cocobana for a tinted finish. A medium pearl and a smaller pearl are placed in the corner of one nail.

12. Finish with top coat

For the last painted strokes, apply more pressure at the start and take the pressure off as you drag down, so you are barely touching the nail. Once everything is cured, finish with top coat.

Pro Tips

  • Use a rubber tool for acrygel. Wetting the bead with slip solution and moving it with a rubber tool stops it sticking to your fingers.
  • Cure in stages. Meg cures the turtle's head and body before adding the legs, and cures the tentacle before adding the dots, so the shapes don't melt.
  • Keep coral rustic. One main stem with long and short branches and a few indents is all you need.
  • Allow extra time. If you attempt this on a client, it is very time consuming and you will need to book extra time.

Who Is This Design For?

These 3D ocean nails are best suited to nail techs and confident hobbyists who already enjoy sculpting and hand-painting. There are a lot of stages, and the 3D work alone took Meg around two hours. That said, the individual techniques are explained simply, so a newer nail artist could try just one creature, or the shell tip, as an accent.

For clients, this is a real statement set for a summer holiday, a beach trip or anyone who loves sea life. It is the sort of set that gets comments, as Meg's model says in the video.

Ways to Make It Your Own

You can keep the same techniques and still change the look of your 3D ocean nails:

  • Choose one or two sculpted creatures as accents and use the shell tip or water design on the rest of the nails.
  • Swap which nails carry the coral, tentacle and starfish to suit your nail length.
  • Change the balance of light and dark strokes in the shell tip for a softer or bolder shell.
  • Add more or fewer pearls, shells and droplets depending on how much detail you like.

Aftercare: Looking After 3D Ocean Nails

Raised nail art needs a little extra care. Apply cuticle oil regularly to keep the skin around the nails hydrated, and wear gloves for cleaning and washing up. Avoid using your nails as tools, and take care with hair, knitwear and pockets, as 3D details and embellishments can catch.

Don't pick at the raised designs or peel anything off, as this can damage the nail underneath. When you are ready for a change, have your 3D ocean nails removed properly by a nail professional.

Frequently Asked Questions

What are the 3D sea creatures made from?

In this tutorial the 3D shapes are sculpted from acrygel, wetted with slip solution and shaped with a rubber tool.

How long do 3D ocean nails take?

Meg describes the set as very time consuming. The sculpting alone took around two hours, so extra time is needed if you are doing it on a client.

How do you create the water effect?

Blue Reflection goes down first, then blooming gel is applied over the area and a mix of Snow White and top coat is placed along the shoreline. Meg also uses an airbrush machine to build up the white wash.

How do you make the shell tip look realistic?

Run strokes of a light and a dark colour across the nail and add a couple of layers of Butterscotch, as the nude tone makes it look more like a natural shell.

Dive Into Your Own 3D Ocean Nails

With sculpted sea life, shell tips and soft water effects, these 3D ocean nails bring the beach to your fingertips. Watch Meg's full video tutorial above to see every stage, then take your time and enjoy building your own little ocean.

Povezani članci